SAE AMS3356 Silicone (VMQ) Rubber, Lubricating Oil and Compression Set Resistant, Electrical Grade, 55 - 65

时间:2024-05-14 05:51:22 来源: 标准资料网 作者:标准资料网 阅读:9654
下载地址: 点击此处下载
Product Code:SAE AMS3356
Title:Silicone (VMQ) Rubber, Lubricating Oil and Compression Set Resistant, Electrical Grade, 55 - 65
Issuing Committee:Ams Ce Elastomers Committee
Scope:This specification covers a silicone (VMQ) rubber in the form of sheet, strip, tubing, extrusions and molded shapes. Primarily for parts required to operate or seal from -55 to +230 degrees C (-67 to +446 degrees F), compounded especially for aircraft piston engine oil resistance, low compression set, and controlled dielectric strength. Silicone elastomer is resistant to deterioration by weathering and by high-aniline-point petroleum-base oils and remains flexible over the temperature range noted. The elastomer is not normally suitable for use in contact with gasoline or aromatic fuels and low-aniline-point petroleum-base fluids due to excessive swelling of the elastomer.
【英文标准名称】:Ironandsteel.Methodsofdeterminationofcontentofnonmetallicinclusionsinwroughtsteel.PartII:micrographicmethodusingstandardsdiagrams.
【原文标准名称】:钢铁.锻钢中非金属杂质含量的测定方法.第2部分:标准图象显微照像法
【标准号】:NFA04-106-1984
【标准状态】:作废
【国别】:法国
【发布日期】:1984-09-01
【实施或试行日期】:1984-09-05
【发布单位】:法国标准化协会(FR-AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:夹杂物;显微分析;美国;实验设计;JK粘度温度特性图表;ASTM粘度温度特性图表;试验机构;计数;图表;非金属夹杂物;钢铁制品;钢;比较试验;比较分析法;铁
【英文主题词】:Chemicalcomposition;Comparativetests;Diagrams;Hardness;Heattreatment;Materialsspecification;Micrographics;Non-metallicinclusions;Steels;Testing;Tests
【摘要】:
【中国标准分类号】:H11
【国际标准分类号】:77_040_99
【页数】:14P.;A4
【正文语种】:其他


基本信息
标准名称:医用电气设备 第二部分:遥控自动驱动式γ射线后装设备安全专用要求
英文名称:Medical electrical equipment-Part 2:Particular requirements for the safety of remote-controlled automatically-driven gamma-ray afterloading equipment
中标分类: 医药、卫生、劳动保护 >> 医疗器械 >> 医用射线设备
ICS分类: 医药卫生技术 >> 医疗设备 >> 射线照相设备
替代情况:被GB 9706.13-2008代替
发布部门:国家技术监督局
发布日期:1997-09-30
实施日期:1998-10-01
首发日期:1997-09-30
作废日期:2010-02-01
主管部门:国家食品药品监督管理局
归口单位:全国医用电器标准化技术委员会
起草单位:中国核动力院设备制造厂
出版社:中国标准出版社
出版日期:2004-04-09
页数:平装16开, 页数:20, 字数:32千字
书号:155066.1-14705
适用范围

本标准规定了用γ射线治疗患者时对遥控自动驱动式后装设备的安全要求。本标准应与《安全通用要求》一同实施。本标准对后装设备的要求-有且仅使用γ密封放射源;-能自动地将γ密封放射源由贮源器送至施源器内的治疗位置;-施源器应设计成适用于患者治疗;-源驱动机构应按预置的程序由控制计时器或定时装置控制,自动地完成放射源的移动。本标准不适用于使用中子放射源的设备。本标准仅适用于距放射源1m处的空气比释动能率不大于500mGy/h的后装设备。否则,必须制定专门的防护措施。本标准要求设备-由合格人员操作使用;-定期维护;-由用户定期检修;-用于体腔内、组织间及浅表放疗等特殊的临床目的。本标准对所使用的γ密封放射源的要求不作规定,这些要求由其他标准规定。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 医药 卫生 劳动保护 医疗器械 医用射线设备 医药卫生技术 医疗设备 射线照相设备